Standard Dash Clock
 

When my dad and I put my Challenger together, I couldn't stand the blank in the right hand hole in my dash, so I set out to get a clock. If that didn't turn out to be a fiasco. I found a clock, but it didn't have a set knob (notice the goofy thing comes out the bottom of the dash), and it didn't work. I got a quartz retrofit movement (the one on the right in the pic) and put the thing together without a knob, and just used a jewler's screwdriver to set it. This was all about fifteen years ago. Over the years I tried to find a knob that would work, and finally found a whole gauge pod with a clock -- with the knob. But when I put the knob on, something inside the clock promptly started skipping and I couldn't set it anyway. AARGH. I think my dad is still laughing.

Over the last few weeks, I took time to pull the clock out of the dash and tear it apart to figure out what was wrong. After several fruitless evenings I finally figured out that one of the gears (the one I pointed a green arrow to) was jumping out of mesh when I tried to turn the mechanism. A small spacer fixed it right up. Hopefully this ends the saga of the clock!

Here are a few pics -- Enjoy!

http://i213.photobucket.com/albums/c...mdashapart.jpg

http://i213.photobucket.com/albums/c...ocksmapart.jpg

http://i213.photobucket.com/albums/c...cksmindash.jpg

RE: Standard Dash Clock
 

there are two styles clock. My 1970 has REMOTE WINDER. It's like a speedo cable that comes out the back of the clock, and the knob is not part of the clock. I recently had the clock quartz conversion at Bob' Speedometer here in Michigan (you can find web site) $134.00.

I have the clock you want from a 1971 dash cluster. It has the front winder that comes straight out through the front plastic facing at the bottom of the clock. The face is very dirty, maybe it can be cleaned, but maybe needs to be restored...Bob's can do that.

Free to you if you want to use it..just pay the mailing cost.
Steve Legel

RE: Standard Dash Clock
 

Thanks for the offer, Steve, but if I get one more piece of anything for this clock, I think my dad will laugh me out of the state! ;) Seriously, though, mine is finally right, I don't think I need any more pieces. I would be interested in seeing pics of yours with the remote winder and the '71 through-the-face if you could post some sometime.

RE: Standard Dash Clock
 

I fall in the same catogory as you. It drives me crazy to have a hole where something belongs and then have it work right also.:D