Bolt Pattern/Offset?
06-23-2008, 09:12 PM
#1
Member
Thread Starter
Join Date: Jun 2008
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Bolt Pattern/Offset?
I currently have American Racing Vintage Torq-Thrust M's on my 06 Charger R/T. I am curious if they will swap onto my Challenger when it arrives...or if I should be looking at selling them.
Specs on the Rims are
Offset 20mm
Backspacing 5.51
Bolt Pattern 5-115
Im not sure what the specs are for the Challenger, any info is appreciated. Thanks!
Cam.
Specs on the Rims are
Offset 20mm
Backspacing 5.51
Bolt Pattern 5-115
Im not sure what the specs are for the Challenger, any info is appreciated. Thanks!
Cam.
06-25-2008, 08:02 AM
#2
Administrator
Join Date: Jan 2006
Posts: 2,365
Likes: 0
Received 0 Likes
on
0 Posts
RE: Bolt Pattern/Offset?
the bolt pattern should be the same...but im not certain on the backspacing. but keep in mind that the challenger show car rode around on charger SRT8 wheels while being toured.
__________________
06-25-2008, 08:06 AM
#3
Senior Member
Join Date: Apr 2006
Location: The Great White North
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
RE: Bolt Pattern/Offset?
may want to check the clearance between the tires and the exhaust at the rear and in the wheel well, doesn't seem to be alot of room there to go to a 275/45 or 285/40 tire in the rear and I think if you went to a 255 in the front it may rub when you turn.
06-30-2008, 07:49 AM
#4
Member
Join Date: Jul 2007
Location:
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
RE: Bolt Pattern/Offset?
ORIGINAL: SRT/ATE/U
I currently have American Racing Vintage Torq-Thrust M's on my 06 Charger R/T. I am curious if they will swap onto my Challenger when it arrives...or if I should be looking at selling them.
Specs on the Rims are
Offset 20mm
Backspacing 5.51
Bolt Pattern 5-115
Im not sure what the specs are for the Challenger, any info is appreciated. Thanks!
Cam.
I currently have American Racing Vintage Torq-Thrust M's on my 06 Charger R/T. I am curious if they will swap onto my Challenger when it arrives...or if I should be looking at selling them.
Specs on the Rims are
Offset 20mm
Backspacing 5.51
Bolt Pattern 5-115
Im not sure what the specs are for the Challenger, any info is appreciated. Thanks!
Cam.
5-115
25.5 offset
08-23-2008, 07:31 PM
#5
Junior Member
Join Date: Aug 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: Bolt Pattern/Offset?
HXCPerf,
25mm + offset, I assume that's the SRT's 20x9 forged Alcoa wheels correct ?
I am planning to get some custom 20x9 fronts & 20x10 or 11 rears, so I am going to have wheels build close to 20-25mm offset specs.
Thanks.
25mm + offset, I assume that's the SRT's 20x9 forged Alcoa wheels correct ?
I am planning to get some custom 20x9 fronts & 20x10 or 11 rears, so I am going to have wheels build close to 20-25mm offset specs.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
MoparToYou
Suspension, Brakes, Tires & Wheels
2
10-17-2008 02:45 PM
ramit
General Dodge Challenger Discussions
44
08-26-2008 02:02 PM
MrKrisSullivan
Off Topic
1
05-07-2008 04:00 AM
