Billionaire

Here are 3 news articles. They have pictures of real green Challengers

Dodge Resurrects HEMI Hi-Po, Retro Colors, Street Cred For SEMA

2008 SEMA Show: More Dodge Challengers on the Way

A green Challenger convertible

mopar2ya

The green vert looks good... but them wheels... either I just don"t care for the Ralley Wheel look in the 20" or they just aren"t done right for the 20"...

kevin2323

chris i think it is the size...if they were 17s i think you would like them better

Cuda340

Full Boost had this article on the Challenger SRT 10, Blacktop and Targa.

Dodge Challenger SRT10 Concept

The opportunity for SRT engineering to “one-up” itself comes to fruition with the 2009 Dodge Challenger SRT10 Concept. Power for the 2009 Dodge Challenger SRT10 Concept comes from the Dodge Viper 8.4-litre, all-aluminium V-10 engine with 600 horsepower and 560 lb. ft. of torque. This new halo concept delivers the well-known SRT credo of benchmark performance. The Dodge Challenger SRT10 Concept includes a fresh coat of Tornado Red paint with a carbon-fibre deck lid and hood. The “shaker hood” is a nostalgic representation of the 1970 HEMI Cuda, giving the 600-hp Viper V-10 engine room to breathe. Brakes have been upgraded and BILSTEIN® shocks at all four corners improve handling balance. The interior boasts sport seats and carbon-fibre accents throughout and, of course, true to the Viper-powered vehicle - a red engine start push-button in the dash.

Dodge Challenger Blacktop

The Dodge Challenger Blacktop Concept is a menacing creation from the minds of the Mopar Underground design team. The Dodge Challenger Blacktop began life as a 2009 Dodge Challenger R/T equipped with a 5.7-liter HEMI® V-8 and six-speed manual transmission. Mopar Underground added custom-made spoilers and front brow. To finish off the look, a black-on-black racing stripe paint scheme was added. The “in the weeds” stance and superb handling characteristics are accomplished by the Mopar coil-over suspension and strut tower brace. Blacktop rolls on massive 22-inch Dodge Viper wheels from Factory Reproductions wrapped in Dunlop tyres measuring 265/35 R22 front and 305/30 R22 rear. To ensure the powertrain can keep up with the suspension, under hood performance is enhanced. The addition of Mopar components, including a cat back dual-exhaust, cold air intake, allow the HEMI V-8 to breathe easy. The interior has been enhanced with Katzkin leather seating finished in bright red plus a Mopar Kicker audio system for premium sound.

Dodge Challenger Targa

The Dodge Challenger Targa is a full-blown competition car that raced and completed the infamous Targa Newfoundland race this year. “Samantha” started life as a Mopar Challenger drag race package car. Many features were borrowed from the Dodge Viper, but the most noticeable is the snakeskin green paint. To keep the front end down, a Mopar chin spoiler "Splats“ developed in a full scale wind tunnel, was added to the front of the car. Mopar gauges keep a close eye on the vital signs. The Mopar hood is equipped with a scoop to make room for the 540-horsepower, 490 lb. ft. of torque, 392 HEMI® V8 Mopar crate motor. Mated to a Tremec six-speed manual gearbox, the engine blasts power to the rear wheels through a production 2009 modified gear ratio in the rear end. An abundance of fade resistant stopping power comes from Stop-Tech brakes. Up front, the six-piston calipers clamp 380-millimetre rotors, while in the rear, four-pot calipers work with 355-mm rotors. Developed by KW, the race suspension and brake upgrades came from a proven hero — the Dodge Viper ACR. With only a few exceptions, the Dodge Challenger Targa was built using parts available through Mopar.

For photos, see:

http://www.fullboost.com.au/news.php?newsId=1961

mopar2ya

Good stuff Cuda340... thanks for posting...

tdub2112

Is the that front tire off the ground?
http://www.fullboost.com.au/popNews2...i=2&n=3&y=2008

mopar2ya

Yes indeed!