Notices
Dodge Challenger R/T Threads specific to the Dodge Challenger R/T should be placed here.

5.7 Rev Limiter

Thread Tools
 
Old 04-13-2009, 07:18 PM
  #1  
Member
Thread Starter
 
flyingfitz's Avatar
 
Join Date: Sep 2008
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default 5.7 Rev Limiter

I have 3000 miles on my R/T 6 Speed. I am normally very aware of the RPM when running through the gears under normal circumstances. I have never exceeded the redline. Today I was having fun on a wet parking lot messing around with donuts and drifting. On two occasions I hit the rev limiter. I didn't notice what RPM the limiter kicked in. I have two questions:

At what RPM does the rev limiter activate?

Will getting into the rev limiter from time to time cause any damage to the engine?

I was really suprised how quickly the engine was revving doing the drifting stuff. Not the way I normally drive but a ton of fun!

Thanks for the help

Fitz
Old 04-14-2009, 03:43 AM
  #2  
Senior Member
 
lear4406's Avatar
 
Join Date: Sep 2006
Location: China Grove NC.
Posts: 1,681
Likes: 0
Received 1 Like on 1 Post
Default

I believe it hits fuel cut. I have over reved a few times and it just shuts down. Most rev limiters will drop cylinders while miantaining the red line limit. Called bouncing off the red line.
Old 04-14-2009, 04:51 AM
  #3  
Member
Thread Starter
 
flyingfitz's Avatar
 
Join Date: Sep 2008
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

The enging shutting down is totally accurate. I used the term rev limiter but it does feel like a fuel cutoff.

I was just wondering if this occurred above the redline and if so how far? I know that it is designed to protect from catastrophic failure but if I inadvertantly get into it from time to time have I done any long term damage or should the engine be totally safe?

Fitz
Old 04-14-2009, 08:23 AM
  #4  
Senior Member
 
lear4406's Avatar
 
Join Date: Sep 2006
Location: China Grove NC.
Posts: 1,681
Likes: 0
Received 1 Like on 1 Post
Default

If you are accellerating through the gears and hit fuel cut no problem. If you are down shifting and mechanically go past the red line by a good bit... there could be damage. But if you just bump off the fuel cut then no big deal.
Old 04-14-2009, 03:15 PM
  #5  
Member
Thread Starter
 
flyingfitz's Avatar
 
Join Date: Sep 2008
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks

Fitz
Old 04-14-2009, 09:51 PM
  #6  
Member
 
Mullit's Avatar
 
Join Date: Jan 2009
Location:
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
Default

downshift plus over rev = bent valves... ask me how
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
REV-X
Regional Section
1
04-26-2011 07:22 PM
DSkippy
Challenger News
6
03-31-2008 12:39 PM



Quick Reply: 5.7 Rev Limiter



All times are GMT -8. The time now is 04:15 PM.