Challenger Parts
11-08-2006, 01:09 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Challenger Parts
Can anyone tell me if a hood for the 74 Challenger is interchangable with the other years? I am selling mine, and the potential buyer is wondering if it will fit a 70 Challenger.
Thanks a lot!!
Diane
Thanks a lot!!
Diane
11-08-2006, 06:56 PM
#2
Senior Member
RE: Challenger Parts
Yes, the hood will fit on it exactly. The only difference is the chrome on the front of the 1974 is painted and the 1970 is aluminium. Also the 74 will screw in from the bottom and the 70 will bolt on the side using studs that stick out of the chrome trim. You can use the chrome strip from the 70 and bolt it onto the 74. Then bolt the hood onto the car and your there. hope this helps, Randy.
11-08-2006, 07:09 PM
#3
Junior Member
Thread Starter
Join Date: Aug 2006
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
RE: Challenger Parts
ORIGINAL: lear4406
Yes, the hood will fit on it exactly. The only difference is the chrome on the front of the 1974 is painted and the 1970 is aluminium. Also the 74 will screw in from the bottom and the 70 will bolt on the side using studs that stick out of the chrome trim. You can use the chrome strip from the 70 and bolt it onto the 74. Then bolt the hood onto the car and your there. hope this helps, Randy.
Yes, the hood will fit on it exactly. The only difference is the chrome on the front of the 1974 is painted and the 1970 is aluminium. Also the 74 will screw in from the bottom and the 70 will bolt on the side using studs that stick out of the chrome trim. You can use the chrome strip from the 70 and bolt it onto the 74. Then bolt the hood onto the car and your there. hope this helps, Randy.
Diane
Thread
Thread Starter
Forum
Replies
Last Post
tdub2112
Off Topic
4
11-20-2007 02:32 PM
Jeremiah 29:11
Suspension, Brakes, Tires & Wheels
6
04-27-2007 06:15 AM