Dodge Challenger Forums

Dodge Challenger Forums (https://dodgechallenger.com/forum/)
-   Engine (https://dodgechallenger.com/forum/engine-16/)
-   -   First Things First (https://dodgechallenger.com/forum/engine-16/first-things-first-79/)

deranged 02-02-2006 02:03 PM

RE: First Things First
 


ORIGINAL: MGDMike

I'm gonna open the hood and just frickin' drool!

Me too! I'll have to wear a bib though! [sm=drooldude.gif][sm=bounceybounce.gif][sm=groupwave.gif][sm=happybounce.gif][sm=happy046.gif][sm=hail.gif]

TechmanBD 02-02-2006 03:00 PM

RE: First Things First
 
MAke sure to clean it up before spotting.

AwsomeSpeed 02-02-2006 10:44 PM

RE: First Things First
 
I think Dodge should come out with a HEMI head for the viper 8.0 V-10 and put it in the challenger.

1 Bad Mirada 02-03-2006 09:51 AM

RE: First Things First
 
hmm..that would make the price so ridiculous that it would sell worse than the viper..

RLSH700 02-03-2006 03:41 PM

RE: First Things First
 
It would also require a larger engine bay which adds weight and length to the car. A supercharged model would be wiser if they wanted to go 600+ hp. Also, if they were going to make a HEMI V10, they should scrap the LA/Magnum V10 and base a new one off of the new HEMI small block because the cost to build the HEMI engine line is significantly less than it was to make the LA/Magnum V8 engine line, which the Viper V10 is based off of. That is probably the real reason why they replaced the 318/360 or 5.2L/5.9L, because the crate engine 360 is not by anymeans weak (380hp & 410ft-lbs of tq). BadStratRT is correct that the price would be redicilous, and would be a bad idea to pursue. No offense AwsomeSpeed, but it just wouldn't work.

1 Bad Mirada 02-03-2006 03:51 PM

RE: First Things First
 
if it is 425hp as placed in the other SRT8 vehicles, i see no reason why you couldnt tickle the 600hp range NA...

first, get the cats off, and get a nice set of headers...i am not familair enough with that intake manifold to know what could be done with it, but figure a bigger TB, and better cam, as well as some sort of computer timing advance, or "chip"...seeing as how in the charger/300c, the 6.1 has dyno'ed to mid 400 range at the crank, 500 should be fairly simple, unless they squeezed everything that they could out of this, which i doubt.

Paladin06 02-03-2006 04:01 PM

RE: First Things First
 
Add 8psi of boost, intercool it and you're at 600hp for sure. I've started discussing the possibility with the best SC shop I know of. PSE in CA.;)




ORIGINAL: BadStratRT

if it is 425hp as placed in the other SRT8 vehicles, i see no reason why you couldnt tickle the 600hp range NA...

first, get the cats off, and get a nice set of headers...i am not familair enough with that intake manifold to know what could be done with it, but figure a bigger TB, and better cam, as well as some sort of computer timing advance, or "chip"...seeing as how in the charger/300c, the 6.1 has dyno'ed to mid 400 range at the crank, 500 should be fairly simple, unless they squeezed everything that they could out of this, which i doubt.

mikeyusaf1983 02-03-2006 04:56 PM

RE: First Things First
 
i was thinking maybe one of those henessey kits like they have for the 300c/charger/magnum

RLSH700 02-03-2006 05:18 PM

RE: First Things First
 
How about one of the HEMI crate engines? Like the 528 or 540 supercharged HEMI![sm=gears.gif] That would be fun having +900hp, if it would fit!;)

1 Bad Mirada 02-03-2006 05:24 PM

RE: First Things First
 
eh...forced induction on a factory NA car is only breeding greed..."8psi is fine on stock internals"...then it isnt anymore...that the engine becomes a paper weight...:D


All times are GMT -8. The time now is 10:20 PM.


© 2024 MH Sub I, LLC dba Internet Brands