Cold Air Install Video
05-24-2008 | 05:09 AM
#1
Thread Starter
Senior Member
Joined: Mar 2007
Posts: 1,734
Likes: 1
From: New Jersey
Cold Air Install Video
DCH installed a Dodge after market cold air intake on an SRT Charger.
They claim improvements on the dyno of 40 hp and 30 ft/lbs. torque.
Don't these claims seem high?
See:
http://www.webridestv.com/showvideo.aspx?video=75303
They claim improvements on the dyno of 40 hp and 30 ft/lbs. torque.
Don't these claims seem high?
See:
http://www.webridestv.com/showvideo.aspx?video=75303
05-24-2008 | 05:31 AM
#2
Senior Member
Joined: Jan 2006
Posts: 2,722
Likes: 0
From: East Valley AZ
RE: Cold Air Install Video
After reviewing the video I must admit the one I saw installed was not a Mopar part!!
EXTREMELY HIGH!! I witnessed a CAI w/K&N filter being installed on a 6.1 Hemi and the dyno gain was was 9 to 11 max after three pulls...
EXTREMELY HIGH!! I witnessed a CAI w/K&N filter being installed on a 6.1 Hemi and the dyno gain was was 9 to 11 max after three pulls...
ORIGINAL: Cuda340
DCH installed a Dodge after market cold air intake on an SRT Charger.
They claim improvements on the dyno of 40 hp and 30 ft/lbs. torque.
Don't these claims seem high?
See:
http://www.webridestv.com/showvideo.aspx?video=75303
DCH installed a Dodge after market cold air intake on an SRT Charger.
They claim improvements on the dyno of 40 hp and 30 ft/lbs. torque.
Don't these claims seem high?
See:
http://www.webridestv.com/showvideo.aspx?video=75303
Thread
Thread Starter
Forum
Replies
Last Post
Cuda340
General Dodge Challenger Discussions
14
08-12-2008 09:02 PM