Few new toys for the car
01-16-2009, 12:53 PM
#1
Senior Member
Thread Starter
Join Date: Nov 2008
Location: Calgary, Alberta Canada
Posts: 506
Likes: 0
Received 0 Likes
on
0 Posts
Few new toys for the car
I have finished installing the functional hood inserts, hood struts, door sills, and the front and rear mud guards, I figured I'd also attack the front spoiler. I purchased the entire SRT8 front spolier w/ the belly pan and the duct work. not that it's going to give me any HUGE gians, I actually like the inlets on the front spoiler from the SRT8. it seems to flow with the cut outs on the rear fascia.
Springs are still itching to get installed but have been on hold till all this crappy weather and slush melts a bit more. Next is the JBA headers that are on order.
Springs are still itching to get installed but have been on hold till all this crappy weather and slush melts a bit more. Next is the JBA headers that are on order.
01-16-2009, 04:16 PM
#3
Member
Join Date: Dec 2008
Location:
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
RE: Few new toys for the car
Do you have any pictures of the mud guards? I've been looking at getting set but I'm not sure if I like them as they will contrast against the stone white color of my car and they look very large.
01-17-2009, 07:25 AM
#5
Senior Member
Join Date: Mar 2006
Location:
Posts: 2,755
Likes: 0
Received 0 Likes
on
0 Posts
RE: Few new toys for the car
Uh....CC, you're planning on lowering the car with those springs, right? Doesn't the SRT front spoiler come lower than your current one? You might want to check the clearance.
01-17-2009, 05:02 PM
#7
Senior Member
Thread Starter
Join Date: Nov 2008
Location: Calgary, Alberta Canada
Posts: 506
Likes: 0
Received 0 Likes
on
0 Posts
RE: Few new toys for the car
^^ hahahaaha, the front spoiler isn't that much different in height than the SE/SXT one, the inlets are cut into the plastic, besides, the darn thing only cost me $75.00 but the springs will only lower the car 1.2" I think after sagging. but I'll be careful, heck my wagon was so low you could just barely get your foot under the rocker panel.
I will post all the pics of the doorsills, mud guards and hood struts and front spoiler tomorrow.
I will post all the pics of the doorsills, mud guards and hood struts and front spoiler tomorrow.
01-20-2009, 05:27 PM
#8
Senior Member
Thread Starter
Join Date: Nov 2008
Location: Calgary, Alberta Canada
Posts: 506
Likes: 0
Received 0 Likes
on
0 Posts
RE: Few new toys for the car
ok so here are some pics of what I have installed so far:
SRT8 Front Spoiler w/ Belly Pan and Ducting
http://memimage.cardomain.com/ride_i....jpg?59818-020
SRT8 Hood Struts
http://memimage.cardomain.com/ride_i....jpg?59818-020
Mopar Door Sills
http://memimage.cardomain.com/ride_i....jpg?59818-020
I'll post pics of the front mudgaurds and rear by the weekend as I have the rear fascia to install
SRT8 Front Spoiler w/ Belly Pan and Ducting
http://memimage.cardomain.com/ride_i....jpg?59818-020
SRT8 Hood Struts
http://memimage.cardomain.com/ride_i....jpg?59818-020
Mopar Door Sills
http://memimage.cardomain.com/ride_i....jpg?59818-020
I'll post pics of the front mudgaurds and rear by the weekend as I have the rear fascia to install
01-20-2009, 09:26 PM
#9
Senior Member
Join Date: Mar 2006
Location:
Posts: 2,755
Likes: 0
Received 0 Likes
on
0 Posts
RE: Few new toys for the car
Oh, my God, CC! Your car is dirty! Don't let the wrong people see those pics! You'll be barred from the Paladin Museum of Unused Challengers for life! 