Dodge Challenger Forums - View Single Post - over center spring install
View Single Post
Old 05-31-2007, 06:07 PM
  #3  
robb e
Junior Member
 
Join Date: May 2007
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default RE: over center spring install

thanks for the help, no scanner though, its the large spring inside the car under the dash at the pedal. the spring has two ends, one end that hooks back just past the spring and the other end hooks after a five inch straight section. the manuel shows the straight section forward with the spring section tucked in under the pedal bracket hooked to a pin close to the firewall. there is no way that i can see it fits that way. i turned it around and hooked everthing up but the pedal would not swing back up by itself after being depressed all the way. i have the clutch adjustment bolt dialed in and the smaller spring that connects to the block is on but still doesn't work right. what is the position of your over center spring? (the one under the dash on the pedal)
thanks for a reply
robb e is offline