WON'T START
I am the original owner of my '72 Challenger 340 with electronic ignition and automatic transmission. It has always started without too much difficulty until now. I cleaned the contacts inside the distributor cap last week and the engine started. I replaced the plugs and wires last summer. It wouldn't start yesterday, so I replaced the distributor cap and attempted to replace the rotor, but it won't come off. I assume it should just pull up and off, but it won't. I'm hesitant to pry it off. Engine still won't start. Any suggestions about removing the rotor and/or getting it started? Carb is getting gas so I'm guessing my problem is electrical. Thank you.