Sounds like I am on the right track. I'm looking for a set of Chrysler 906 heads with 73.5CC combustion chambers. This would be 10.0cc less than I currently am running, and hopefully should increase compression by 1 to 1.5 points. Am also looking into cams to pep it up.

I am running headers/dual exhaust and a performer manifold. Can't go much taller with the intake due to hood clearance. Rear gears are 3.23. Will also be looking at at torque converter for a little help.

Thanks for you input!

John



[IMG]local://upfiles/446/CD0CA370499144AF9CA23A573C795EAF.jpg[/IMG]