Originally Posted by
BLK 6050
The main piece of advice I would give you, is to be very careful when you are getting ready to apply the emblem to the fender as the tape will actually pull the emblem towards the fender as you get close. So make sure you are straight, as there is no second chance once it’s on! Using a grease pencil and or tape is your best bet for applying the emblem straight. Just take your time…..
when i stuck my home made six-pack emblems on my hood
i measured, marked with a crayola crayon, then i cut a strip of
that stick on insulation for screen doors and stuck that to the car
so i would have a base to set them emblems on, sort of like a shelf.
hit it on an angle and then went straight to the car, i then pealed off the insulation, with the wax on the car they came right back off and both sides came out perfect