Notices
Dodge Challenger R/T Threads specific to the Dodge Challenger R/T should be placed here.

2009 Challenger R/T 6-speed dyno numbers

Thread Tools
 
Old 04-21-2009 | 12:56 PM
  #11  
KyChallengerR/T6spd's Avatar
Member
 
Joined: Mar 2009
Posts: 95
Likes: 0
Default I don't care what the rating is

It's what you can do with what you have . As 10 sec Dodge say's . The Challenger is a heavy car. It runs good and handles good on the street with the 5.7 . And the SRT 8 is even better . From what have been told . I haven't driven one. Power steering and all sort of stuff rob power from the engine . Under drive pulley's can help some . Or take the power steering off as I did on my 71 Buick GS 455 Stage 1 and put a manual box on . And the air conditioning . I don't plan to do that and dont think many other's would . But it does add HP back to the car. I priced the Magna Flow exhaust for my 6 spd yesterday . The best pipes and everything . Was $1500.00 at my friends muffler shop. 10 sec. Dodge is that what you have on your's . And what brand header ? I can handle a little more rumble after getting used to the stock exhaust . I think 10 sec. Dodge has shown what the Challenger can do with minor mod's. Good Job.

Last edited by KyChallengerR/T6spd; 04-21-2009 at 12:59 PM. Reason: spelling
Old 04-21-2009 | 01:42 PM
  #12  
KyChallengerR/T6spd's Avatar
Member
 
Joined: Mar 2009
Posts: 95
Likes: 0
Default Remember the cross Ram's

Originally Posted by mot250
I wouldn't be surprised if thery were under rated a tad for the whole SRT comparison but a different intake on the trucks could mean big difference in HP between the Rams and our Challengers.

As an example, when Ford did the Fox to SN95 body style in 1994, one big difference was the hood was closer to the engine requiring a lower upper intake for the hood to clear the engine. That change cost the Mustang at least 10 HP from the 1993 to the 1994 Mustang GT.
The longer the tube from the intake valve . The more ram effect and more fuel and air into the cylinder . Also a cooler charge with being away from the engine heat . A sort of tunnel ram sideway's.
Old 04-22-2009 | 11:58 AM
  #13  
Axel's Avatar
Senior Member
 
Joined: Jul 2007
Posts: 456
Likes: 0
From:
Default

In English to the above, it is the intake/exhaust space that makes the differnce. There has always been a difference between the truck and car raitings on the Hemi, take the Charger and Ram as examples, due to underhood space restrictions.
Old 04-22-2009 | 09:17 PM
  #14  
mot250's Avatar
Senior Member
 
Joined: Nov 2008
Posts: 179
Likes: 0
From:
Default

Originally Posted by Axel
In English to the above, it is the intake/exhaust space that makes the differnce. There has always been a difference between the truck and car raitings on the Hemi, take the Charger and Ram as examples, due to underhood space restrictions.
Exactly what I was getting at KYChallenger and Axle with my example but you both were more concise...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
johnandahalf
General Dodge Challenger Discussions
1
07-06-2013 06:13 PM
Cuda340
Challenger News
2
02-28-2011 10:04 AM
tdub2112
Sights N Sounds
0
08-06-2008 10:07 AM
hemicuda
General Dodge Challenger Discussions
11
08-05-2008 03:14 PM
davidstan
General Dodge Challenger Discussions
3
01-16-2008 01:00 AM




All times are GMT -8. The time now is 12:05 AM.