Bolt piercing driver/passenger seat leather
08-17-2008 | 10:07 AM
#31
Member
Joined: Jul 2008
Posts: 87
Likes: 0
From:
RE: Bolt piercing driver/passenger seat leather
I have not heard this complaint from them yet and as far as I can tell this is the first time it has come up. All of the LX series cars and even a jeep modle share the same seat frames and the bolts are the same in them. I have let someone know to follow this thread so they are now aware.
ORIGINAL: RRUNNER
Called my salesman and told him about it and he was shocked. He checked the Challenger on the floor to confirm and also a Charger, and found the Charger has the same bolts.
Has anyone checked to see if the Charger guys have any issues with it?
Called my salesman and told him about it and he was shocked. He checked the Challenger on the floor to confirm and also a Charger, and found the Charger has the same bolts.
Has anyone checked to see if the Charger guys have any issues with it?
ORIGINAL: jh27_1970
Another quik cover for the bolts is the rubber covers for wire mesh shelving like closet maid ect its the larger of the 2 sizes and could be found if not in your closet at any home depot type store will be going to show dealer tomorrow just to have it on record thanks for the heads up all..
Another quik cover for the bolts is the rubber covers for wire mesh shelving like closet maid ect its the larger of the 2 sizes and could be found if not in your closet at any home depot type store will be going to show dealer tomorrow just to have it on record thanks for the heads up all..
08-18-2008 | 08:58 AM
#36
Member
Joined: Jul 2008
Posts: 87
Likes: 0
From:
RE: Bolt piercing driver/passenger seat leather
I have already contacted them and they are aware and looking into it. The seat frames are supplied from a vendor so a change would need to be made at that level.
ORIGINAL: KMPX2
Anyone have a photo of this? I work at a Mopar car plant and I can talk to the rep. from the seat company.
Anyone have a photo of this? I work at a Mopar car plant and I can talk to the rep. from the seat company.
08-23-2008 | 09:08 AM
#37
Senior Member
Joined: May 2008
Posts: 1,425
Likes: 0
From:
RE: Bolt piercing driver/passenger seat leather
ORIGINAL: RUBBERBNDMAN
I posted on SRT owners forum but no responses.
Also posted on LX forums.
I posted on SRT owners forum but no responses.
Also posted on LX forums.
08-23-2008 | 09:17 AM
#38
Senior Member
Joined: Jan 2006
Posts: 2,722
Likes: 0
From: East Valley AZ
RE: Bolt piercing driver/passenger seat leather
Keep us posted. I have covered mine with a rubber cap but would like to see shorter bolts installed.
ORIGINAL: mjorgensen
I have already contacted them and they are aware and looking into it. The seat frames are supplied from a vendor so a change would need to be made at that level.
I have already contacted them and they are aware and looking into it. The seat frames are supplied from a vendor so a change would need to be made at that level.
ORIGINAL: KMPX2
Anyone have a photo of this? I work at a Mopar car plant and I can talk to the rep. from the seat company.
Anyone have a photo of this? I work at a Mopar car plant and I can talk to the rep. from the seat company.
08-23-2008 | 06:56 PM
#39
Junior Member
Joined: Dec 2007
Posts: 21
Likes: 0
RE: Bolt piercing driver/passenger seat leather
I took my car into the dealer and they took the bolts out and cut them off. It looks fine and seems to have solved the issue. They did the same thing to another challenger already in the shop.
R Day
R Day
08-24-2008 | 05:41 AM
#40
Member
Joined: Aug 2008
Posts: 33
Likes: 0
From:
RE: Bolt piercing driver/passenger seat leather
I placed 4 rubber 5/16" vaccum line caps on my bolts. Dealer service manager is going to file a report to Chrysler.
ORIGINAL: Andre@Edge
I put a small rubber cap over the bolt ends and seems to be holding
I put a small rubber cap over the bolt ends and seems to be holding