How do I disable Oil Change light?
 

I got my oil changed at like 2400 and the stupid dealer forgot to do the indicator or whatever can someone tell me where to locate it and disable it it's getting annoying thanks.,

RE: How do I disable Oil Change light?
 

Straight for the manual...

To reset the oil change indicator
system (after performing the scheduled maintenance)
refer to the following procedure.

1. Turn the ignition switch to the ON position (Do not
start the engine).

2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.

3. Turn the ignition switch to the OFF/LOCK position.

NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

RE: How do I disable Oil Change light?
 

thanks mopar!!!!! sorry =(

RE: How do I disable Oil Change light?
 

No problem... I don"t know about you but I did not buy a Challenger so I could read the manual... ;)

RE: How do I disable Oil Change light?
 

when i disconnected my battery it went away

I'd like to add to this.
It seems with the Keyless systems you need to physically pop off the Black/Silver cap and stick the Key in it. I tried 4 times keyless and it was a no go.

Carbon

I have the Keyless-Go and it has reset every time by using the procedure that Mopar2ya posted without removing the button.The ignition has to be in the ON position without starting the vehicle.