How do I disable Oil Change light?
11-15-2008, 03:58 AM
#1
Senior Member
Thread Starter
Join Date: Aug 2008
Location: Dade County , FL
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
How do I disable Oil Change light?
I got my oil changed at like 2400 and the stupid dealer forgot to do the indicator or whatever can someone tell me where to locate it and disable it it's getting annoying thanks.,
11-15-2008, 04:31 AM
#2
Senior Member
Join Date: Apr 2007
Location:
Posts: 2,840
Likes: 0
Received 0 Likes
on
0 Posts
RE: How do I disable Oil Change light?
Straight for the manual...
To reset the oil change indicator
system (after performing the scheduled maintenance)
refer to the following procedure.
1. Turn the ignition switch to the ON position (Do not
start the engine).
2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
09-09-2009, 02:11 PM
#6
Senior Member
Join Date: Feb 2008
Location:
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
I'd like to add to this.
It seems with the Keyless systems you need to physically pop off the Black/Silver cap and stick the Key in it. I tried 4 times keyless and it was a no go.
Carbon
It seems with the Keyless systems you need to physically pop off the Black/Silver cap and stick the Key in it. I tried 4 times keyless and it was a no go.
Carbon
09-09-2009, 03:29 PM
#7
Senior Member
Join Date: Aug 2008
Location: Marshall, Illinois
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
I have the Keyless-Go and it has reset every time by using the procedure that Mopar2ya posted without removing the button.The ignition has to be in the ON position without starting the vehicle.
Thread
Thread Starter
Forum
Replies
Last Post
challygirl
General Dodge Challenger Discussions
21
01-15-2009 01:07 PM
Cuda340
Off Topic
2
07-31-2007 08:17 AM
