Install on the MyGiG lock pick
#31
RE: Install on the MyGiG lock pick
ORIGINAL: Andre@Edge
Remeber also number one jumper is set to up when your box arrives. you must set it down (low speed) for the Challenger
Remeber also number one jumper is set to up when your box arrives. you must set it down (low speed) for the Challenger
#33
RE: Install on the MyGiG lock pick
Andre,
Last question, installing the backup camera where you indicated thru the license plate light, does this block any light from hitting the license plate at all?
Thanks again!!
Pau
Last question, installing the backup camera where you indicated thru the license plate light, does this block any light from hitting the license plate at all?
Thanks again!!
Pau
#34
RE: Install on the MyGiG lock pick
Mine blocks light because I chose to mount it on that lens. You can move it to one side, or the other and nothing is blocked. I mounted mine to the light so I could bring the car back to OE with the purchase of only the lens
#37
RE: Install on the MyGiG lock pick
It is attached to the very lip of the lens and will still light the plate very well. Its far enough to the rear that the back light does not show. two wires to run. One to the battery in the trunk, and the other can run along the inside wire harness down the passenger side.
#39
RE: Install on the MyGiG lock pick
Oh boy I feel stupid... Ok I installed the lock pick as per Andres discription except I left 5 up because I WANT the dvd to play while driving ...Well set the gizmo put it in and the only thing I can do is open and close the dvd door What am I missing ??? I tried calling but they are closed. I just feel dumb BUt the car is awsome!!!!!