Bolt Pattern/Offset?
06-23-2008 | 10:12 PM
#1
Thread Starter
Member
Joined: Jun 2008
Posts: 40
Likes: 0
Bolt Pattern/Offset?
I currently have American Racing Vintage Torq-Thrust M's on my 06 Charger R/T. I am curious if they will swap onto my Challenger when it arrives...or if I should be looking at selling them.
Specs on the Rims are
Offset 20mm
Backspacing 5.51
Bolt Pattern 5-115
Im not sure what the specs are for the Challenger, any info is appreciated. Thanks!
Cam.
Specs on the Rims are
Offset 20mm
Backspacing 5.51
Bolt Pattern 5-115
Im not sure what the specs are for the Challenger, any info is appreciated. Thanks!
Cam.
06-25-2008 | 09:02 AM
#2
Administrator
Joined: Jan 2006
Posts: 2,365
Likes: 0
RE: Bolt Pattern/Offset?
the bolt pattern should be the same...but im not certain on the backspacing. but keep in mind that the challenger show car rode around on charger SRT8 wheels while being toured.
__________________
06-25-2008 | 09:06 AM
#3
Senior Member
Joined: Apr 2006
Posts: 148
Likes: 0
From: The Great White North
RE: Bolt Pattern/Offset?
may want to check the clearance between the tires and the exhaust at the rear and in the wheel well, doesn't seem to be alot of room there to go to a 275/45 or 285/40 tire in the rear and I think if you went to a 255 in the front it may rub when you turn.
06-30-2008 | 08:49 AM
#4
Member
Joined: Jul 2007
Posts: 75
Likes: 0
From:
RE: Bolt Pattern/Offset?
ORIGINAL: SRT/ATE/U
I currently have American Racing Vintage Torq-Thrust M's on my 06 Charger R/T. I am curious if they will swap onto my Challenger when it arrives...or if I should be looking at selling them.
Specs on the Rims are
Offset 20mm
Backspacing 5.51
Bolt Pattern 5-115
Im not sure what the specs are for the Challenger, any info is appreciated. Thanks!
Cam.
I currently have American Racing Vintage Torq-Thrust M's on my 06 Charger R/T. I am curious if they will swap onto my Challenger when it arrives...or if I should be looking at selling them.
Specs on the Rims are
Offset 20mm
Backspacing 5.51
Bolt Pattern 5-115
Im not sure what the specs are for the Challenger, any info is appreciated. Thanks!
Cam.
5-115
25.5 offset
08-23-2008 | 08:31 PM
#5
Junior Member
Joined: Aug 2008
Posts: 1
Likes: 0
RE: Bolt Pattern/Offset?
HXCPerf,
25mm + offset, I assume that's the SRT's 20x9 forged Alcoa wheels correct ?
I am planning to get some custom 20x9 fronts & 20x10 or 11 rears, so I am going to have wheels build close to 20-25mm offset specs.
Thanks.
25mm + offset, I assume that's the SRT's 20x9 forged Alcoa wheels correct ?
I am planning to get some custom 20x9 fronts & 20x10 or 11 rears, so I am going to have wheels build close to 20-25mm offset specs.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
MoparToYou
Suspension, Brakes, Tires & Wheels
2
10-17-2008 03:45 PM
ramit
General Dodge Challenger Discussions
44
08-26-2008 03:02 PM
MrKrisSullivan
Off Topic
1
05-07-2008 05:00 AM