UPDATED the list on the first page.

Recently added:
FRPP GTA axlebacks. They have a nice rumble sound, but are not LOUD.
FRPP floor mats - Wife bought them for a xmas gift

Prothane Bullit Motor Mounts - This helps when shifting by keeping the motor from twisting to much
Actually I only have 1 in. I wen to take the second out, and from what I can tell, the assembler cross threaded the bolt to the nut on the Kmember and now the weld on the nut broke and the bolt just spins. I have tried several things. Putting a screw driver in between, hoping it would add pressure on the nut so not to move. Tried my air hammer drill. Didn't work. Next, something I didn't want to do is drill a hole in the Kmember below the nut and grab hold from that way. [:@]. I may have to cut the bolt and go to the hardware store and get a new one. But will still need to drill the hole to hold the nut in place. But with just one in, you can feel the difference.

And Paladin, that is fine. I can understand that.