What mods have you done to your different cars?
Member
Joined: Jan 2006
Posts: 86
Likes: 0
From:
RE: What mods have you done to your different cars?
ORIGINAL: RLSH700
WOW! I bet you spent more on modding that than you would have if you bought it new.
WOW! I bet you spent more on modding that than you would have if you bought it new.
I'm almost in the 13's without internal motor mods, so I think I'm doing okay. The only "meaningful" go-fast mods listed are the headers/intake/exhaust, PCM and gears.
Thanks for your interest!
Eric
Administrator
Joined: Jan 2006
Posts: 2,365
Likes: 0
RE: What mods have you done to your different cars?
mitsubishi..everything on the car has a little badge that says "genuine mitsubishi part"..much like the sebring coupes had the "diamond star motors"..they look the same and all, they just dont use the DSM name anymore...and in talking to people who have driven both the older dodge autostick, and the new mitsu autostick, the mitsu is far preferred, because there is no over ride...with, say, the 300M...if you put it in first gear, and run it to the rev limiter, it shifts..mine, just bounces off the rev limiter over and over until you manually shift it.
__________________
Thread Starter
Super Moderator
Joined: Jan 2006
Posts: 4,057
Likes: 0
From:
RE: What mods have you done to your different cars?
ORIGINAL: Caprice SS
And you'd be correct. But the fun of it is doing the mod and seeing the difference. Plus I enjoy messing around with those who challenge the big, 4-door sedan. Most of the guys here are faster than me, I'm sure, but I would compare favorably to another 4400-lb. sedan overall. Talk about a handicap! I'd love to shed 1000 lbs.!
I'm almost in the 13's without internal motor mods, so I think I'm doing okay. The only "meaningful" go-fast mods listed are the headers/intake/exhaust, PCM and gears.
Thanks for your interest!
Eric
ORIGINAL: RLSH700
WOW! I bet you spent more on modding that than you would have if you bought it new.
WOW! I bet you spent more on modding that than you would have if you bought it new.
I'm almost in the 13's without internal motor mods, so I think I'm doing okay. The only "meaningful" go-fast mods listed are the headers/intake/exhaust, PCM and gears.
Thanks for your interest!
Eric
__________________
"To Debate and Moderate" since 2006
College Graduate:
B.S. in Marketing
A.A. in nothing
The first 426 Dual Quad member.
The first to 2000 posts
"To Debate and Moderate" since 2006
College Graduate:
B.S. in Marketing
A.A. in nothing
The first 426 Dual Quad member.
The first to 2000 posts
Thread Starter
Super Moderator
Joined: Jan 2006
Posts: 4,057
Likes: 0
From:
RE: What mods have you done to your different cars?
ORIGINAL: BadStratRT
mitsubishi..everything on the car has a little badge that says "genuine mitsubishi part"..much like the sebring coupes had the "diamond star motors"..they look the same and all, they just dont use the DSM name anymore...and in talking to people who have driven both the older dodge autostick, and the new mitsu autostick, the mitsu is far preferred, because there is no over ride...with, say, the 300M...if you put it in first gear, and run it to the rev limiter, it shifts..mine, just bounces off the rev limiter over and over until you manually shift it.
mitsubishi..everything on the car has a little badge that says "genuine mitsubishi part"..much like the sebring coupes had the "diamond star motors"..they look the same and all, they just dont use the DSM name anymore...and in talking to people who have driven both the older dodge autostick, and the new mitsu autostick, the mitsu is far preferred, because there is no over ride...with, say, the 300M...if you put it in first gear, and run it to the rev limiter, it shifts..mine, just bounces off the rev limiter over and over until you manually shift it.
__________________
"To Debate and Moderate" since 2006
College Graduate:
B.S. in Marketing
A.A. in nothing
The first 426 Dual Quad member.
The first to 2000 posts
"To Debate and Moderate" since 2006
College Graduate:
B.S. in Marketing
A.A. in nothing
The first 426 Dual Quad member.
The first to 2000 posts
Administrator
Joined: Jan 2006
Posts: 2,365
Likes: 0
RE: What mods have you done to your different cars?
i can leave from a stop in 2nd gear...and i can get into 4th basically as soon as im moving....i dont have any noises from the tranny, but the 2nd to 3rd gear shift is very soft...but it has been forever...i would like if it shifted 2-3 as hard as it shifted 1-2, but if i would have gotten a stick, this wouldnt be a problem...
__________________
Senior Member
Joined: Jan 2006
Posts: 146
Likes: 0
From: Phillipsburg, NJ
RE: What mods have you done to your different cars?
On my dad's 2004 2500 Ram Laramie he has gotten the SuperChips for his truck and installed aftermarket headers, a 2" blocker lift in he front of the truck, ryno lineing, swiched over to all sythetic oil in his truck. here is a pic of it.......
Senior Member
Joined: Jan 2006
Posts: 146
Likes: 0
From: Phillipsburg, NJ
RE: What mods have you done to your different cars?
My blazer i have added cold air intake, flowmaster exaust, performance chip.
It is getting repainted this spring when it warms up. Thats y theres primer and bono on the side.
It is getting repainted this spring when it warms up. Thats y theres primer and bono on the side.
Thread Starter
Super Moderator
Joined: Jan 2006
Posts: 4,057
Likes: 0
From:
RE: What mods have you done to your different cars?
ORIGINAL: BadStratRT
i can leave from a stop in 2nd gear...and i can get into 4th basically as soon as im moving....i dont have any noises from the tranny, but the 2nd to 3rd gear shift is very soft...but it has been forever...i would like if it shifted 2-3 as hard as it shifted 1-2, but if i would have gotten a stick, this wouldnt be a problem...
i can leave from a stop in 2nd gear...and i can get into 4th basically as soon as im moving....i dont have any noises from the tranny, but the 2nd to 3rd gear shift is very soft...but it has been forever...i would like if it shifted 2-3 as hard as it shifted 1-2, but if i would have gotten a stick, this wouldnt be a problem...
__________________
"To Debate and Moderate" since 2006
College Graduate:
B.S. in Marketing
A.A. in nothing
The first 426 Dual Quad member.
The first to 2000 posts
"To Debate and Moderate" since 2006
College Graduate:
B.S. in Marketing
A.A. in nothing
The first 426 Dual Quad member.
The first to 2000 posts
Thread Starter
Super Moderator
Joined: Jan 2006
Posts: 4,057
Likes: 0
From:
RE: What mods have you done to your different cars?
Nice mods, TruckeeT2. Thanks for contributing.
__________________
"To Debate and Moderate" since 2006
College Graduate:
B.S. in Marketing
A.A. in nothing
The first 426 Dual Quad member.
The first to 2000 posts
"To Debate and Moderate" since 2006
College Graduate:
B.S. in Marketing
A.A. in nothing
The first 426 Dual Quad member.
The first to 2000 posts
Senior Member
Joined: Mar 2006
Posts: 136
Likes: 0
From:
RE: What mods have you done to your different cars?
I posted this elsewhere, but I'll do it again here:
Factory:
2000 Camaro SS #1077, Bright Rally Red, Hurst M6, T-Tops, Ebony Leather,
SLP Bilstein Suspension, SLP ZR-1 Chrome.
Mods:
SLP Grille,!CAGS, !EGR, !AIR,
LS6 Intake, SLP Air Lid, Mac SFC’s, BMR STB, Carbon Fiber rear letter inserts,
T/A Bezel, Hooker Long Tube Headers, RPM4 Cam
Result:
RWHP 363
RWTQ 348
Factory:
2000 Camaro SS #1077, Bright Rally Red, Hurst M6, T-Tops, Ebony Leather,
SLP Bilstein Suspension, SLP ZR-1 Chrome.
Mods:
SLP Grille,!CAGS, !EGR, !AIR,
LS6 Intake, SLP Air Lid, Mac SFC’s, BMR STB, Carbon Fiber rear letter inserts,
T/A Bezel, Hooker Long Tube Headers, RPM4 Cam
Result:
RWHP 363
RWTQ 348